June 2017 - computational.science

CFP: Resilience@Euro-Par 2017 - Papers due May 5
by Christian Engelmann 08 May '19

08 May '19

We apologize if you receive multiple copies of this call for papers. -------------------------------------------------------------------------------- 10th Workshop on Resiliency in High Performance Computing (Resilience) in Clusters, Clouds, and Grids <http://www.csm.ornl.gov/srt/conferences/Resilience/2017> in conjunction with the 23rd International European Conference on Parallel and Distributed Computing (Euro-Par), Santiago de Compostela, Spain, August 28 - September 1, 2017 <http://europar2017.usc.es> Overview: Resilience is a critical challenge as high performance computing (HPC) systems continue to increase component counts, individual component reliability decreases (such as due to shrinking process technology and near-threshold voltage (NTV) operation), and software complexity increases. Application correctness and execution efficiency, in spite of frequent faults, errors, and failures, is essential to ensure the success of the extreme-scale HPC systems, cluster computing environments, Grid computing infrastructures, and Cloud computing services. While a fault (e.g., a bug or stuck bit) is the cause of an error, its manifestation as a state change is considered an error (e.g., a bad value or incorrect execution), and the transition to an incorrect service is observed as a failure (e.g., an application abort or system crash). A failure in a computing system is typically observed through an application abort or a full/partial service or system outage. A detectable correctable error is often transparently handled by hardware, such as a single bit flip in memory that is protected with single-error correction double-error detection (SECDED) error correcting code (ECC). A detectable uncorrectable error (DUE) typically results in a failure, such as multiple bit flips in the same addressable word that escape SECDED ECC correction, but not detection, and ultimately cause an application abort. An undetectable error (UE) may result in silent data corruption (SDC), e.g., an incorrect application output. There are many other types of hardware and software faults, errors, and failures in computing systems. Resilience for HPC systems encompasses a wide spectrum of fundamental and applied research and development, including theoretical foundations, fault detection and prediction, monitoring and control, end-to-end data integrity, enabling infrastructure, and resilient solvers and algorithm-based fault tolerance. This workshop brings together experts in the community to further research and development in HPC resilience and to facilitate exchanges across the computational paradigms of extreme-scale HPC, cluster computing, Grid computing, and Cloud computing. Submission Guidelines: Authors are invited to submit papers electronically in English in PDF format. Submitted manuscripts should be structured as technical papers and BETWEEN 10 AND 12 PAGES, including figures, tables and references, using Springer's Lecture Notes in Computer Science (LNCS) format at <http://www.springer.com/computer/lncs?SGWID=0-164-6-793341-0>. Papers with less than 10 or more than 12 pages will not be accepted due to publisher guidelines. Submissions should include abstract, key words and the e-mail address of the corresponding author. Papers not conforming to these guidelines may be returned without review. All manuscripts will be reviewed and will be judged on correctness, originality, technical strength, significance, quality of presentation, and interest and relevance to the conference attendees. Submitted papers must represent original unpublished research that is not currently under review for any other conference or journal. Papers not following these guidelines will be rejected without review and further action may be taken, including (but not limited to) notifications sent to the heads of the institutions of the authors and sponsors of the conference. Submissions received after the due date or not appropriately structured may also not be considered. The proceedings will be published in Springer's LNCS as post-conference proceedings. At least one author of an accepted paper must register for and attend the workshop for inclusion in the proceedings. Authors may contact the workshop program chairs for more information. Important websites: - Resilience 2017 Website: <http://www.csm.ornl.gov/srt/conferences/Resilience/2017> - Resilience 2017 Submissions: <https://easychair.org/conferences/?conf=europar2017workshops> - Euro-Par 2017 website: <http://europar2017.usc.es> Topics of interest include, but are not limited to: - Theoretical foundations for resilience: - Metrics and measurement - Statistics and optimization - Simulation and emulation - Formal methods - Efficiency modeling and uncertainty quantification - Fault detection and prediction: - Statistical analyses - Machine learning - Anomaly detection - Data and information collection - Visualization - Monitoring and control for resilience: - Platform and application monitoring - Response and recovery - RAS theory and performability - Application and platform knobs - Tunable fidelity and quality of service - End-to-end data integrity: - Fault tolerant design - Degraded modes - Forward migration and verification - Fault injection - Soft errors - Silent data corruption - Enabling infrastructure for resilience: - RAS systems - System software and middleware - Programming models - Tools - Next-generation architectures - Resilient solvers and algorithm-based fault tolerance: - Algorithmic detection and correction of hard and soft faults - Resilient algorithms - Fault tolerant numerical methods - Robust iterative algorithms - Scalability of resilient solvers and algorithm-based fault tolerance Important Dates: - Workshop papers due: May 5, 2017 - Workshop author notification: June 16, 2017 - Workshop early registration: TBD - Workshop paper (for informal workshop proceedings): July 21, 2017 - Workshop camera-ready papers: October 3, 2017 General Co-Chairs: - Stephen L. Scott Senior Research Scientist - Systems Research Team Tennessee Tech University and Oak Ridge National Laboratory, USA scottsl(a)ornl.gov - Chokchai (Box) Leangsuksun, SWEPCO Endowed Associate Professor of Computer Science Louisiana Tech University, USA box(a)latech.edu Program Co-Chairs: - Patrick G. Bridges University of New Mexico, USA bridges(a)cs.unm.edu - Christian Engelmann Oak Ridge National Laboratory , USA engelmannc(a)ornl.gov Program Committee: - Ferrol Aderholdt, Oak Ridge National Laboratory, USA - Dorian Arnold, University of New Mexico, USA - Rizwan Ashraf, Oak Ridge National Laboratory, USA - Wesley Bland, Intel Corporation, USA - Hans-Joachim Bungartz, Technical University of Munich, Germany - Franck Cappello, Argonne National Laboratory and University of Illinois at Urbana-Champaign, USA - Marc Casas, Barcelona Supercomputer Center, Spain - Zizhong Chen, University of California at Riverside, USA - Robert Clay, Sandia National Laboratories, USA - Miguel Correia, Universidade de Lisboa, Portugal - Nathan DeBardeleben, Los Alamos National Laboratory, USA - James Elliott, Sandia National Laboratories, USA - Kurt Ferreira, Sandia National Laboratories, USA - Michael Heroux, Sandia National Laboratories, USA - Saurabh Hukerikar, Oak Ridge National Laboratory, USA - Dieter Kranzlmueller, Ludwig-Maximilians University of Munich, Germany - Sriram Krishnamoorthy, Pacific Northwest National Laboratory, USA - Ignacio Laguna, Lawrence Livermore National Laboratory, USA - Scott Levy, University of New Mexico, USA - Kathryn Mohror, Lawrence Livermore National Laboratory, USA - Christine Morin, INRIA Rennes, France - Dirk Pflueger, University of Stuttgart, Germany - Nageswara Rao, Oak Ridge National Laboratory, USA - Alexander Reinefeld, Zuse Institute Berlin, Germany - Rolf Riesen, Intel Corporation, USA - Yves Robert, ENS Lyon, France - Thomas Ropars, Universite Grenoble Alpes, France - Martin Schulz, Lawrence Livermore National Laboratory, USA - Keita Teranishi, Sandia National Laboratories, USA -- Christian Engelmann, Ph.D. R&D Staff Scientist Computer Science Research Group Computer Science and Mathematics Division Oak Ridge National Laboratory Mail: P.O. Box 2008, Oak Ridge, TN 37831-6173, USA Phone: +1 (865) 574-3132 / Fax: +1 (865) 576-5491 e-Mail: engelmannc(a)ornl.gov / Home: www.christian-engelmann.info

2 10

IEEE HPCS Workshop on High Performance Computing Systems for Bioinformatics and Life Sciences (BILIS 2017) - Ext Deadline
by Mario Cannataro 03 Oct '18

03 Oct '18

I apologize for any cross-posting of this announcement. ======================================================================================== Int. Workshop on High Performance Computing Systems for Bioinformatics and Life Sciences (BILIS 2017) http://hpcs2017.cisedu.info/conference/workshops---hpcs2017/workshop17-bilis July 17 – July 21, 2017 Genoa, Italy held in conjunction with International Conference on High Performance Computing & Simulation (HPCS 2017) http://hpcs17.cisedu.info/ ======================================================================================== * * * CALL FOR PAPERS * * * EXTENDED Submission Deadline: April 15, 2017 Submissions could be for full papers, short papers, poster papers, or posters ======================================================================================== IMPORTANT DATES Paper Submissions: --------------------------------- April 15, 2017 - Extended Acceptance Notification: --------------------------- April 28, 2017 Camera Ready Papers and Registration Due by: ------- May 11, 2017 Conference Dates: --------------------------------- July 17 – 21, 2017 ======================================================================================== SCOPE AND OBJECTIVES Incorporating new advancements of Information Technology (IT) in general and High Performance Computing (HPC) in particular in the domain of Life Sciences and Biomedical Research continues to receive tremendous attention of researchers, biomedical institutions and the rest of the biomedical community. Although medical instruments have benefited a great deal from the technological advances of the couple of decades, the impact of integrating IT advancements in addressing critical problems in biomedical research remains limited and the process of penetrating IT tools in the medical profession continues to be a very challenging problem. For example, the use of electronic medical records and Hospital Information Systems in improving health care remains fragmented. Similarly, the use of advanced computational tools seamlessly in the biomedical research cycle continues to be minimal. Due to the computational intensive problems in life sciences, the marriage between the Bioinformatics domain and high performance computing is critical to the advancement of Biosciences. In addition, the problems in this domain tend to be highly parallelizable and deal with large datasets, hence using HPC is a natural fit. The Bioinformatics domain is rich in applications that require extracting useful information from very large and continuously growing sequence of databases. Most methods used for analyzing DNA/Protein sequences are known to be computationally intensive, providing motivation for the use of powerful computational systems with high throughput characteristics. Moreover, high-throughput wet lab platforms such as next generation sequencing, microarray and mass spectrometry, are producing a huge amount of experimental "omics" data. The increasing availability of omics data poses new challenges to bioinformatics applications that need to face in a semi-automatic way an overwhelming availability of raw data. Main challenges regard: 1) the efficient storage, retrieval and integration of experimental data; 2) their efficient and high-throughput preprocessing and analysis; 3) the building of reproducible "in silico" experiments; 4) the integration of analysis results with pre-existing knowledge usually stored into ontologies. As the storage, preprocessing and analysis of raw experimental data is becoming the main bottleneck of the analysis pipeline, parallel computing is playing an important role in all steps of the life sciences research pipeline, from raw data management and processing, to data integration and analysis, and to data exploration and visualization. Moreover, Cloud Computing is becoming the key technology to hide the complexity of computing infrastructures, to reduce the cost of the data analysis task, and especially to change the overall business model of biomedical research and health provision. Considering the complex analysis pipeline of the biomedical research, the bottleneck is more and more moving toward the storage, integration, and analysis of experimental data, as well as their correlation and integration with publicly available data banks In such a scenario, large-scale distributed databases and parallel bioinformatics tools are key tools for organizing and exploring biological and biomedical data with the aim to discover new knowledge in biology and medicine. In the current Information age, further progress of Medical Sciences requires successful integration with Computational and Information Sciences. The workshop attempts to attract innovative ways of how such integration can be achieved via Bioinformatics and Biomedical Informatics research, particularly in taking advantage of the new advancements in HPC systems. The focus of data analysis and data mining tools in biomedical research highlights the current state of research in the key biomedical research areas such as bioinformatics, medical informatics and biomedical imaging. Addressing performance concerns in managing and accessing medical data, while facilitating the ability to integrate and correlate different biomedical databases remains an outstanding problem in biomedical research. The amount of available biomedical data continues to grow in an exponential rate; however, the impact of utilizing such resources remains minimal. The development of innovative tools in HPC environments to integrate, analyze and mine such data sources is a key step towards achieving large impact levels. The workshop focuses on topics related to the utilization of HPC systems and new models of parallel computing and cloud computing in problems related to Biomedical Informatics and Life Sciences, along with the use of data integration and data mining tools to support biomedical research and Health Care. The BILIS Workshop topics include (but are not limited to) the following: HPC for the Analysis of Biological Data Bioinformatics Tools for Health Care Parallel Algorithms for Bioinformatics Applications Ontologies in Biology and Medicine Integration and Analysis of Molecular and Clinical Data Parallel Bioinformatics Algorithms Algorithms and Tools for Biomedical Imaging and Medical Signal Processing Energy Aware Scheduling Techniques for Large Scale Biomedical Applications HPC for analyzing Biological Networks Next Generation Sequencing and Advanced Tools for DNA Assembly HPC for Gene, Protein/RNA Analysis and Structure Prediction Identification of Biomarkers Biomedical Visualization Tools Efficient Clustering and Classification Algorithms Correlation Networks in Biomedical Research Data Mining Techniques in Biomedical Applications Heterogeneous Data Integration HPC systems for Ontology and Database Integration Pattern Recognition and Search Tools in Biological and Clinical Databases Ubiquitous Medical Knowledge Discovery and Exchange HPC for Monitoring and Treatment Facilities Drug Design and Modeling Computer Assisted Surgery and Medical Procedures Remote Patient Monitoring, Homecare Applications Mobile and Wireless Healthcare and Biomedical Applications Cloud Computing for Bioinformatics, Medicine, and Health Systems INSTRUCTIONS FOR PAPER SUBMISSIONS You are invited to submit original and unpublished research works on above and other topics related to HPC for Bioinformatics, Healthcare and Life Sciences. Submitted papers must not have been published or simultaneously submitted elsewhere. For Regular papers, please submit a PDF copy of your full manuscript, not to exceed 8 double-column formatted pages per template, and include up to 6 keywords and an abstract of no more than 400 words. Additional pages will be charged additional fee. Submission should include a cover page with authors' names, affiliation addresses, fax numbers, phone numbers, and all authors email addresses. Please, indicate clearly the corresponding author(s) although all authors are equally responsible for the manuscript. Short papers (up to 4 pages), poster papers and posters (please refer to http://hpcs2017.cisedu.info/1-call-for-papers-and-participation/call-for-po… for posters submission details) will also be considered. Please specify the type of submission you have. Please include page numbers on all preliminary submissions to make it easier for reviewers to provide helpful comments. Submit a PDF copy of your full manuscript to the workshop organizers via email as attachments to Hesham Ali: hali(a)unomaha.edu, Mario Cannataro: cannataro(a)unicz.it. Acknowledgement will be sent within 48 hours of submission. Only PDF files will be accepted, uploaded to the submission link above. Each paper will receive a minimum of three reviews. Papers will be selected based on their originality, relevance, significance, technical clarity and presentation, language, and references. Submission implies the willingness of at least one of the authors to register and present the paper, if accepted. At least one of the authors of each accepted paper will have to register and attend the HPCS 2017 conference to present the paper at the workshop. PROCEEDINGS Accepted papers will be published in the Conference proceedings. Instructions for final manuscript format and requirements will be posted on the HPCS 2017 Conference web site. It is our intent to have the proceedings formally published in hard and soft copies and be available at the time of the conference. The proceedings is projected to be included in the IEEE or ACM Digital Library and indexed in all major indexing services accordingly. SPECIAL ISSUE Plans are underway to have the best papers, in extended version, selected for possible publication in a journal as special issue. Detailed information will soon be announced and will be made available on the conference website. If you have any questions about paper submission or the workshop, please contact the workshop organizers. IMPORTANT DATES Paper Submissions: ------------------------------------ April 15, 2017 - Extended Acceptance Notification: ------------------------------ April 28, 2017 Camera Ready Papers and Registration Due by: ---------- May 11, 2017 Conference Dates: ------------------------------------ July 17 – 21, 2017 WORKSHOP ORGANIZERS Prof. Hesham H. Ali Department of Computer Science College of Information Science and Technology University of Nebraska at Omaha Omaha, NE 68182 USA Email: hesham(a)unomaha.edu Prof. Mario Cannataro Department of Medical and Surgical Sciences University "Magna Græcia" of Catanzaro Viale Europa (Località Germaneto) 88100 Catanzaro, Italy Email: cannataro(a)unicz.it

1 7

Recruitment - PhD Interns on Cyber-Physical Security at SUTD, Singapore
by Jianying Zhou 19 Jul '17

19 Jul '17

Singapore University of Technology and Design (SUTD) is a young university established in collaboration with MIT. Cyber security is one of its most important areas and grows very fast with rich research funding. It has the world's best facilities in cyber-physical systems (CPS) including testbeds for Secure Water Treatment (SWaT), Water Distribution (WADI), Electric Power and Intelligent Control (EPIC), and IoT. (See more info at https://itrust.sutd.edu.sg/research/testbeds/) I am looking for PhD interns with interest in cyber-physical system security (IoT, autonomous vehicle, and power grid etc.), especially on the topics such as 1) Lightweight and low-latency crypto algorithms for CPS devices, 2) Resilient authentication of devices and data in CPS, 3) Advanced SCADA firewall to filter more sophisticated attacking packets in CPS, 4) Big data based threat analytics for detection of both known and unknown threats, 5) Attack mitigation to increase the resilience of CPS. The attachment will be at least 3 months. Allowance will be provided for local expenses. Interested candidates please send your CV with a research statement to Prof. Jianying Zhou. Contact: Prof. Jianying Zhou Email: jianying_zhou(a)sutd.edu.sg Home: http://jianying.space/

2 3

CfP: IEEE eScience Environmental Computing Workshop (ECW) - extended deadline 14th July
by Matti Heikkurinen/LMU 29 Jun '17

29 Jun '17

Call for Papers: Environmental Computing Workshop (ECW)- deadline extended Organised in conjunction with eScience 2017 conference October 24 - 27 2017 Auckland, New Zealand http://www.envcomp.eu/eScience2017 This workshop will bring together practitioners, policymakers, and environmental modelling experts to present the latest developments in Environmental Computing. Submissions by groups and individuals working on related – or potentially related – fields are also encouraged in order to uncover new opportunities for interdisciplinary collaboration. The topics of interest include: • Case studies in environmental computing related domains • Environmental modelling and optimisation techniques • Novel environmental computing applications • Multi-scale, multi-model and multi-physics systems • Civil protection and related engineering challenges • Scalability of environmental HPC and Big Data applications • Risk analysis, assessment, management, and mitigation • Interdisciplinary and stakeholder collaboration • Dynamic multi-directional model coupling approaches • Multifaceted data and metadata frameworks • Urgent computing and probabilistic models • Data visualisation and interactive analysis • Uncertainty quantification and visualisation BACKGROUND Already today, many domain- or problem-specific areas – such as meteorology or seismic analysis –use multi-model, multi-data, and multi-scale approaches to analyse and study environmental phenomena and their impact. However, a more generalised approach to producing actionable knowledge from different environmental data sources is needed to build more comprehensive multi-model systems that can more readily support various decision making processes. The topic is of acute interest due to environment-related societal challenges that require generalising, productising and maturing today’s environmental modelling solutions. Imminent application areas of environmental computing include managing disasters and disaster risks, supporting prompt political decision making, and many other similar domains. PAPER AND ABSTRACT SUBMISSION The contributions can be traditional papers (maximum 10 pages), experience papers (short papers or annotated slide sets of maximum 15 slides) or presentations abstracts. Contributions should be submitted at https://easychair.org/conferences/?conf=ecw2017 by June 30th. Please consult the conference call for papers page ( http://escience2017.org.nz/submissions/call-for-papers/) for information about templates and submission types. IMPORTANT DATES Paper Submission: July 14, 2017 Notification of Acceptance: August 4, 2017 Camera-Ready: August 25, 2017 Conference: October 23 – 27, 2017 (Auckland, New Zealand) ORGANISATION AND CONTACT Dieter Kranzlmüller, LMU & LRZ Munich, Germany Sam Dean, NIWA, New Zealand Matti Heikkurinen, LMU Munich http://www.envcomp.eu/eScience2017 - info(a)envcomp.eu -- Matti Heikkurinen - LMU heikku(a)nm.ifi.lmu.de - +41 76 716 05 31

1 0

[simu-conf] WSC 2017 - Posters, Case Studies, PhD Colloquium, Vendor track
by vsim-conf＠sce.carleton.ca 28 Jun '17

28 Jun '17

Winter Simulation Conference (WSC) 2017 - Call for Papers December 3-6, 2017 Red Rock Casino Resort & Spa www.wintersim.org Posters, Case Studies, PhD Colloquium, Vendor tracks WSC TURNS 50: SIMULATION EVERYWHERE! With 360 accepted papers, panels, special tracks, and an amazing venue, this 50th Anniversary Winter Simulation Conference promises to be a very exciting event. This is a reminder that there are other upcoming deadlines: . Poster Track http://meetings2.informs.org/wordpress/wsc2017/poster-sessions/ . PhD Colloquium http://meetings2.informs.org/wordpress/wsc2017/phd-colloquium/ . Case Studies http://meetings2.informs.org/wordpress/wsc2017/tracks/#caseStudies . Vendor Track http://meetings2.informs.org/wordpress/wsc2017/tracks/#vendor KEYNOTE & TITAN SPEAKERS 50th Anniversary Keynote - Barry L Nelson Northwestern University WSC 2067: What Are The Chances? At the November 1967 "Conference on the Applications of Simulation Using GPSS" it seems unlikely that anyone was wondering if the conference would still be occupying a big hotel in 2017. Conferences persist for many reasons, but a technical conference like WSC has to remain relevant to users, vendors, researchers and consumers (not just hotels) to survive. If our kind of simulation vanished, then so (eventually) would WSC. What is required for simulation to "remain relevant" for the next 50 years? Without fear of having to answer for my crimes in 2067, I boldly speculate on what SHOULD matter for the next 10-20 years, if not the next 50, with a focus on our strength: dealing with uncertainty. 50th Anniversary Titans Robert G. Sargent Professor Emeritus - Syracuse University A Prospective on Fifty-Five Years of the Evolution of Scientific Respect for Simulation Bernard P. Zeigler Professor Emeritus of Electrical and Computer Engineering - University of Arizona MASM Keynote Stephane Dauzere-Peres Professor, Ecole des Mines de Saint-Etienne Achievements and Lessons Learned from a Long-term Academic-Industrial Collaboration Military Keynote Douglas Hodson Associate Professor, Professor of Computer Engineering at the Air Force Institute of Technology (AFIT) Military Simulation: A Ubiquitous Future 50th Anniversary Track Keynote Brian Hollocks Professor, Bournemouth University, Faculty of Management. History of Simulation in the United Kingdom Further information about submission and the conference: http://www.wintersim.org Twitter: @WSConf Facebook: https://www.facebook.com/wintersimulationconference/ [apologies for duplicated messages. Problems/issues: vsim-conf-owner(a)sce.carleton.ca]

1 0

CFP BIOMA'2018 @Paris
by El-ghazali Talbi 27 Jun '17

27 Jun '17

Apologies for cross-posting. Appreciate if you can distribute this CFP to your network. **************************************************************************************** BIOMA 2018 8th International Conference on Bioinspired Optimization Methods and their Applications 16-18 May 2018 Paris, France http://bioma2018.sciencesconf.org/ **************************************************************************************** The 8th International Conference on Bioinspired Optimization Methods and their Applications BIOMA 2018 will be held in Paris (France) on May 16-18, 2018. http://bioma2018.sciencesconf.org/ BIOMA is one of the main events focusing on the progress of the area of bioinspired optimization methods and their applications. As in the seven previous editions, BIOMA 2018 will provide an opportunity to the international research community in optimization to discuss recent research results, to develop new ideas and collaborations in a friendly and relaxed atmosphere. BIOMA 2018 welcomes papers that cover any aspects of bioinspired optimization research such as new algorithmic developments, high-impact applications, new research challenges, theoretical developments, implementation issues, and experimental studies. BIOMA 2018 strives for a high-quality program that will be completed by a number of invited talks and special sessions. Important dates - Submission deadline Dec 1, 2017 - Notification of acceptance Feb 15, 2018 - Final papers Mar 1, 2018 Paper submission : We will accept submissions in two different formats. - S1: Extended abstracts of a maximum of 3 pages - S2: Long papers of a maximum of 12 pages Proceedings: Accepted papers will be published in the proceedings that will be available at the conference. In addition, a conference Springer book or LNCS (Lectures Notes in Computer Science) is considered. Proposals of invited sessions - Deadline Nov 1, 2017. Contact bioma2018(a)sciencesconf.org E-G. Talbi (Conference Chair)

1 0

ACS 2017 -- Submission Deadline 30 June, 2017
by Roger Hallman 24 Jun '17

24 Jun '17

ACS 2017 : The 1st International Workshop on Autonomics and Cloud Security Link: http://www.autonomic-conference.org/iccac-2017/resources/ACS/ When: Sep 18, 2017 - Sep 22, 2017 Where: The University of Arizona, Tucson, AZ Submission Deadline: Jun 30, 2017 Notification Due: Jul 11, 2017 Final Version Due: Jul 21, 2017 Call For Papers: The 1st International Workshop on Autonomics and Cloud Security (ACS 2017) Co-located with the 2017 IEEE International Conference on Cloud and Autonomic Computing (ICCAC) and the 11th IEEE International Conference on Self-Adaptive and Self-Organizing Systems (SASO 2017) The University of Arizona, Tucson, AZ, USA -- September 18-22, 2017 Cloud computing is used by many organizations to build scalable systems in different domains, such as retail, healthcare, human resources, finance, education, and government. Our society has become more dependent on the services provided by these cloud-based systems. As a result, cyber-attacks on these cloud-based systems can have a dramatic impact on all aspects of our lives. Cloud security is an active area of research, involving many approaches for ensuring the confidentiality, availability, and integrity of data and applications hosted in the cloud. However, existing techniques for securing cloud-based systems, including autonomic-based cloud systems, are based on the assumption that people will be involved in managing them. These techniques require end user input to implement effective cybersecurity strategies to defend the systems. The emerging area of Autonomic Cybersecurity can provide solutions that complement existing cybersecurity techniques in the cloud. The goal of Autonomic Cybersecurity is to use Autonomic Computing techniques and approaches to defend computing systems. The Autonomics and Cloud Security workshop aims to investigate approaches to cloud security in general, including cloud-based autonomic systems, as well as autonomic cybersecurity approaches for defending cloud-based systems. The workshop is soliciting papers in two categories, namely, the use of autonomic computing techniques to address cloud security, and techniques and approaches for securing cloud-based autonomic systems. Researchers are encouraged to submit original research contributions in these two categories, which include, but are not limited to, the following major areas: The use of autonomic computing techniques to address cloud security: -Challenges in autonomics and cloud security and privacy -Emerging issues in autonomic cloud security -Autonomic identity and access management in cloud computing -Autonomic cybersecurity monitoring and incident response in cloud computing -Autonomic auditing and accountability in cloud computing -Autonomic approaches to usable security in cloud computing -Autonomic security protocols in cloud computing -Autonomic approaches to privacy in the cloud -Autonomic approaches for securing data and communication in the cloud -Secure autonomics-based cloud federation -Self-adaptive security policies -Self-configuration of cloud systems -Scalable cybersecurity in the cloud -Autonomic event recovery in the cloud -Autonomic approaches to moving target defense in the cloud -Autonomic approaches to cyber defense in the cloud -Autonomic approaches to intrusion detection and prevention systems in the cloud -Techniques and approaches for building resilient cloud systems -Cybersecurity in fog and edge computing -Application of big data analytics to securing the cloud -Autonomic approaches to trusted computing Techniques and approaches for securing cloud-based autonomic systems: -Cybersecurity in the cloud for supporting IoT applications -Security protocols in cloud-based autonomic systems -Techniques and approaches for privacy preservation in cloud-based autonomic systems -Event detection and forensics in cloud-based autonomic systems -Techniques and approaches for cloud-based autonomic systems resiliency -Secure computing techniques for the cloud (securing data-in-processing via Homomorphic Encryption, Secure Multi-Party Computation, and other secure computing techniques). -Techniques and approaches for anomaly detection in cloud-based autonomic systems -Scalable cybersecurity in cloud-based autonomic systems -Ethical hacking and penetration testing in cloud-based autonomic systems -Case studies in securing cloud-based systems We solicit research papers containing original research results and challenge papers motivating new research directions. In addition, the workshop will facilitate discussion and collaborative research among the participants. Submissions may be made via: https://easychair.org/conferences/?conf=acs17 . UPDATE: A special issue on Cluster Computing (The Journal of Networks, Software Tools and Applications) will include an extension of the best papers of all the workshops that will be held in conjunction with ICCAC 2017. Organization: General Chair Mamadou H. Diallo -- SPAWAR Systems Center Pacific, U.S. Department of Defense, USA Program Co-Chairs Michael August -- SPAWAR Systems Center Pacific, U.S. Department of Defense, USA Sherif Abdelwahed -- Mississippi State University, USA Technical Program Committee: Kim-Kwang Raymond Choo -- The University of Texas at San Antonio, USA Tiago Cruz -- University of Coimbra, Portugal Song Fu -- University of North Texas, USA Roger Hallman -- SPAWAR Systems Center Pacific, USA Sokratis K. Katsikas -- Norwegian University of Science & Technology, Norway Ryan Ko -- University of Waikato, New Zealand Thomas Moyer -- MIT Lincoln Laboratory, USA Nuno Neves -- Universidade de Lisboa, Portugal Jason R.C. Nurse -- University of Oxford, United Kingdom Stacy Prowell -- Oak Ridge National Laboratory, USA Muthu Ramachandran -- Leeds Beckett University, United Kingdom Khaled Salah -- Khalifa University of Science, Technology & Research, United Arab Emirates Sachin Shetty -- Old Dominion University, USA Vijay Varadharajan -- University of Newcastle, Australia Publicity and Web Chair: Christopher Graves -- SPAWAR Systems Center Pacific, U.S. Department of Defense, USA Scott M. Slayback -- SPAWAR Systems Center Pacific, U.S. Department of Defense, USA Contact: General Chair -- mamadou.h.diallo(a)navy.mil Publicity and Web Chair -- christopher.t.graves(a)navy.mil

1 0

CFP: SC17 workshop, Computational Reproducibility at Exascale 2017 (CRE-2017)
by Keyrouz, Walid (Fed) 23 Jun '17

23 Jun '17

Apologies for the potential duplication. -Walid ---------------- CALL FOR PAPERS ====================================================================== Computational Reproducibility at Exascale Workshop (CRE2017) ------------------------------------------------------------ Where: In cooperation with SC17, Denver, Colorado When: Sunday afternoon, November 12, 2017 Web: http://www.cs.fsu.edu/~cre Submit: https://easychair.org/conferences/?conf=cre2017 Deadline: Monday, August 28, 2017 Notifications: Monday, September 18, 2017 Full Papers: Monday, October 02, 2017 Organized by: Walid Keyrouz (NIST), Miriam Leeser (NEU), and Michael Mascagni (FSU & NIST) ====================================================================== This workshop will address the problems of reproducibility in HPC in general and those anticipated as we scale to Exascale machines in the next decade. We seek contributions of extended abstracts (two pages) in the areas of computational reproducibility in HPC from academic, government, and industry stakeholders. Areas of interest include, but are not limited to: - Case studies of reproducibility or the lack of thereof - Reproducibility issues in current HPC - System-level solutions - Algorithmic solutions - Software solutions - Uncertainty quantification in computational reproducibility - Fundamental numerical analysis of reproducibility - Future prospects Papers submitted to the workshop will be reviewed and the top papers will be selected to be presented at the workshop. In addition, a group of papers will be published in a special issue of the International Journal of High-Performance Computing and Applications (IJHPCA) devoted to Computational Reproducibility. Please note that papers submitted to the IJHPCA for the CRE2017 special issue must fall within the IJHPCA's editorial scope. This primarily means that all papers for the special issue must have relevance to high-performance computing. Overview and Background ======================= Experimental reproducibility is a cornerstone of the scientific method. As computing has grown into a powerful tool for scientific inquiry, computational reproducibility has been one of the core assumptions underlying scientific computing. With "traditional" single-core CPUs, documenting a numerical result was relatively straightforward. However, hardware developments over the past several decades have made it almost impossible to ensure computational reproducibility or to even fully document a computation without incurring a severe loss of performance. This loss of reproducibility started when systems combined parallelism (e.g., clusters) with non-determinism (e.g., single-core CPUs with out-of-order execution). It has accelerated with recent architectural trends towards platforms with increasingly large numbers of processing elements, namely multicore CPUs and compute accelerators (GPUs, Intel Xeon Phi, FPGAs). Programmers targeting these platforms rely on tools and libraries to produce codes or execute them efficiently. As a result, codes can run efficiently, but have execution details that can be impossible to predict and are often very difficult to understand after execution. Furthermore, parallel implementations often result in code with varying execution orders between runs, leading to non-reproducible computations. The underlying reasons are that (1) the hardware and system software allocate parallel work in ways that are not always specifiable at compile time and (2) the execution often proceeds in an opportunistic manner with the execution order changing between runs. As such, floating-point computations, which are not commutative and associative, can have different execution orders and execute on different processing elements between runs, leading to runs with varying results as a matter of fact. The predictability of systems is further complicated by two issues that are becoming more critical as systems grow in scale: (1) interconnect systems with latencies that are often outside the control of programmers and (2) reliability as the mean time between failure (MTBF) is now measured in hours on large systems. This situation seriously affects the ability to rely on scientific computations as a metrological substitute for experimentation. This workshop extends the Numerical Reproducibility at Exascale Workshops (conducted in 2015 and 2016 at SC) to address the broader range of issues in reproducibility that arise when computing at Exascale. The first edition, NRE2015 was held at SC15, its webpage can be found here: http://www.nist.gov/itl/ssd/is/numreprod2015.cfm. The second edition, NRE2016, was at SC16 and its webpage can be found here: http://www.cs.fsu.edu/~cre/nre-2016.html. Submissions =========== Submissions of two page extended abstracts are sought. The format for the abstracts should follow the IEEE Conference Proceedings format. Templates are available at "IEEE - Manuscript Templates for Conference Proceedings" (https://www.ieee.org/conferences_events/conferences/publishing/templates.ht…) The full papers must be in the format of the International Journal of High-Performance Computing and Applications (IJHPCA) (https://us.sagepub.com/en-us/nam/manuscript-submission-guidelines) The abstracts are to submitted as a PDF document using Easychair at https://easychair.org/conferences/?conf=cre2017 Important Dates (all are Mondays) ================================= Aug. 28, 2017: submission deadline for two page abstracts via https://easychair.org/conferences/?conf=cre2017 Sep. 18, 2017: notification of authors about their submissions based on rejection, acceptance as a paper, acceptance as a paper and presentation Oct. 02, 2017: submission deadline for full papers for refereeing via the IJHPCA site, the papers must be in IJHPCA format Organizers and Co-Editors of the IJHPCA Special Issue ===================================================== - Walid Keyrouz, National Institute of Standards and Technology (NIST), USA - Miriam Leeser, Northeastern University, USA - Michael Mascagni, National Institute of Standards and Technology (NIST) and Florida State University, USA Steering Committee ================== - Dong H. Ahn, Lawrence Livermore National Lab, USA - David Bailey, UC Davis, USA - Mike Heroux, Sandia National Laboratory, USA - Torsten Hoefler, ETH-Zurich, Switzerland - Walid Keyrouz (co-organizer), NIST, USA - Miriam Leeser (co-organizer), Northeastern University, USA - Xiaoye Sherry Li, Lawrence Berkeley National Laboratory, USA - Yaohang Li, Old Dominion University, USA - Michael Mascagni (co-organizer), FSU/NIST, USA - Junji Nagano, Institute of Statistical Mathematics, Japan - Nathalie Revol, INRIA/ENS-Lyon, France - Siegfried Rump, University of Hamburg, Germany - Michela Taufer, University of Delaware Contact ======= E-mail: numerical.reproducibility.at.nist.gov (replace ".at." by "@") -Walid ------ Walid Keyrouz, PhD Research Scientist NIST | ITL | SSD

1 0

[CFP] 7th Int. Symposium on Data-driven Process Discovery and Analysis (SIMPDA2017)
by Fulvio Frati 23 Jun '17

23 Jun '17

** SIMPDA 2017 ** [Apologies if you receive multiple copies of this cfp] **************************************************************************** *** SIMPDA 2017 SEVENTH INTERNATIONAL SYMPOSIUM ON DATA-DRIVEN PROCESS DISCOVERY AND ANALYSIS 6-8 DECEMBER, 2017 - NEUCHATEL, SWITZERLAND http://simpda2017.di.unimi.it **************************************************************************** *** ## About SIMPDA With the increasing automation of business processes, growing amounts of process data become available. This opens new research opportunities for business process data analysis, mining and modeling. The aim of the IFIP 2.6 International Symposium on Data-Driven Process Discovery and Analysis is to offer a forum where researchers from different communities and the industry can share their insight in this hot new field. The Symposium will feature a number of keynotes illustrating advanced approaches, shorter presentations on recent research, a competitive PhD seminar and selected research and industrial demonstrations. This year the symposium will be held in Neuchatel. ###Call for Papers The IFIP International Symposium on Data-Driven Process Discovery and Analysis (SIMPDA 2017) offers a unique opportunity to present new approaches and research results to researchers and practitioners working in business process data modelling, representation and privacy-aware analysis. The symposium will bring together leading researchers, engineers and scientists from around the world. Full papers must not exceed 15 pages. Short papers are limited to at most 4 pages. All papers must be original contributions, not previously published or under review for publication elsewhere. All contributions must be written in English and must follow the LNCS Springer Verlag format. Templates can be downloaded from: http://www.springer.de/comp/lncs/authors.html Accepted papers will be published in a pre-proceeding volume of CEUR workshop series. The authors of the accepted papers will be invited to submit extended articles to a post-symposium proceedings volume which will be published in the LNBIP series (Lecture Notes in Business Information Processing, http://www.springer.com/series/7911) scheduled for late 2018 (extended papers length will be between 7000 and 9000 words). Around 10-15 papers will be selected for publication after a second round of review. ### Topics Topics of interest for submission include, but are not limited to: - Business Process Modeling languages, notations and methods - Lightweight Process Model - Data-aware and data-centric approaches - Process Mining with Big Data - Variability and configuration of process models - Process simulation and static analyses - Process data query languages - Process data mining - Privacy-aware process data mining - Process metadata and semantic reasoning - Process patterns and standards - Foundations of business process models - Resource management in business process execution - Process tracing and monitoring - Process change management and evolution - Business process lifecycle - Case studies and experience reports - Social process discovery - Crowdsourced process definition and discovery ### Workshop Format: In accordance to our historical tradition of proposing SIMPDA as a symposium, we propose an innovative format for this workshop: The number of sessions depend on the number of submissions but, considering the previous editions, we envisage to have four sessions, with 4-5 related papers assigned to each session. A special session (with a specific review process) will be dedicated to discuss research plan from PhD students. Papers are pre-circulated to the authors that will be expected to read all papers in advance but to avoid exceptional overhead, two are assigned to be prepared with particular care, making ready comments and suggestions. The bulk of the time during each session will be dedicated to open conversations about all of the papers in a given session, along with any linkages to the papers and discussions within an earlier session. The closing session (30 minutes), will include a panel about open challenges during which every participant will be asked to assemble their thoughts/project ideas/goals/etc that they got out of the workshop. ### Call for PhD Research Plans The SIMPDA PhD Seminar is a workshop for Ph.D. students from all over the world. The goal of the Seminar is to help students with their thesis and research plans by providing feedback and general advice on how to use their research results. Students interested in participating in the Seminar should submit an extended abstract describing their research. Submissions can relate to any aspect of Process Data: technical advances, usage and impact studies, policy analyses, social and institutional implications, theoretical contributions, interaction and design advances, innovative applications, and social implications. Research plans should be at most of 5 page long and should be organised following the following structure: - Abstract: summarises, in 5 line, the research aims and significance. - Research Question: defines what will be accomplished by eliciting the relevant the research questions. - Background: defines the background knowledge providing the 5 most relevant references (papers or books). - Significance: explains the relevance of the general topic and of the specific contribution. - Research design and methods: describes and motivates the method adopted focusing on: assumptions, solutions, data sources, validation of results, limitations of the approach. - Research stage: describes what the student has done so far. ### SIMPDA PhD award A doctoral award will be given by the SIMPDA PhD Jury to the best research plan submitted. Student Scholarships An application for a limited number of scholarships aimed at students coming from emerging countries has been submitted to IFIP. In order to apply, please contact paolo.ceravolo(a)unimi.it ### CALL for Demonstrations and Posters Demonstrations showcase innovative technology and applications, allowing for sharing research work directly with colleagues in a high-visibility setting. Demonstration proposals should consist of a title, an extended abstract, and contact information for the authors, and should not exceed 10 pages. Posters allow the presentation of late-breaking results in an informal, interactive manner. Poster proposals should consist of a title, an extended abstract, contact information for the authors, and should not exceed 2 pages. Accepted demonstrations and posters will be presented at the symposium. Abstracts will appear in the proceedings. ### Important Dates - Paper Submission: 4 October 2017 - Submission of PhD Presentations: 4 October 2017 - Notification of Acceptance: 14 November 2017 - Submission of Camera Ready Papers: 28 November 2017 - Second International Symposium on Process Data: 6-8 December 2017 - Post-proceeding submissions: 30 March 2018 ## Keynote Speakers TBA ## Organizers ### CHAIRS - Paolo Ceravolo, Università degli Studi di Milano, Italy - Maurice van Keulen, University of Twente, The Netherlands - Kilan Stoffel, University of Neuchatel, Switzerland ### ADVISORY BOARD - Ernesto Damiani, Università degli Studi di Milano, Italy - Erich Neuhold, University of Vienna, Austria - Philippe Cudré-Mauroux , University of Fribourg, Switzerland - Robert Meersman, Graz University of Technology, Austria - Wilfried Grossmann, University of Vienna, Austria ### Program Committee - Akhil Kumar, Penn State University, USA - Benoit Depaire, University of Hasselt, Belgium - Chintan Mrit, University of Twente, The Netherlands - Christophe Debruyne, Trinity College Dublin, Ireland - Ebrahim Bagheri, Ryerson University, Canada - Edgar Weippl, TU Vienna, Austria - Fabrizio Maria Maggi, University of Tartu, Estonia - George Spanoudakis, City University London, UK - Haris Mouratidis, University of Brighton, UK - Isabella Seeber, University of Innsbruck, Austria - Jan Mendling, Vienna University of Economics and Business, Austria - Josep Carmona, UPC - Barcelona, Spain - Kristof Boehmer, University of Vienna, Austria - Manfred Reichert, Ulm University, Germany - Marcello Leida, TAIGER, Spain - Mark Strembeck, WU Vienna, Austria - Massimiliano De Leoni, Eindhoven TU, Netherlands - Matthias Weidlich, Imperial College, UK - Mazak Alexandra, University of Vienna, Austria - Mohamed Mosbah, University of Bordeaux - Mustafa Jarrar, Birzeit University, Palestine - Robert Singer, FH Joanneum, Austria - Roland Rieke, Fraunhofer SIT, Germany - Schahram Dustdar, Vienna University of Technology, Austria - Thomas Vogelgesang, University of Oldenburg, Germany - Valentina Emilia Balas, University of Arad, Romania - Wil Van der Aalst, Technische Universiteit Eindhoven, The Netherlands

1 0

CFP: 3rd International Workshop on Algorithmic Aspects of Cloud Computing (ALGOCLOUD 2017)
by George Pallis 21 Jun '17

21 Jun '17

[Please accept our apologies if you received multiple copies of this call] Submission Deadline: June 23, 2017 ---------------------------------------------------------------------------------- 3rd International Workshop on Algorithmic Aspects of Cloud Computing (ALGOCLOUD 2017) co-located with ALGO 2017 September 4th - 5th, 2017 – Vienna, Austria ---------------------------------------------------------------------------------- ALGOCLOUD (https://algo2017.ac.tuwien.ac.at/algocloud/ <https://algo2017.ac.tuwien.ac.at/algocloud/>) is the international forum bringing together international researchers, students, and practitioners to present research activities and results on topics related to algorithmic, design, and development aspects of modern cloud-based systems. ALGOCLOUD is co-located with the ALGO conference (https://algo2017.ac.tuwien.ac.at/ <https://algo2017.ac.tuwien.ac.at/>), a leading international meeting of researchers working in algorithms and their engineering. ALGOCLOUD welcomes submissions on all theoretical, design, and implementation aspects of modern cloud-based systems. ALGOCLOUD is particularly interested in novel algorithms in the context of cloud computing, cloud architectures, as well as experimental work that evaluates contemporary cloud approaches and pertinent applications. ALGOCLOUD also welcomes demonstration manuscripts, which discuss successful elastic system developments, as well as experience/use-case articles. Contributions may span a wide range of algorithms for modeling, practices for constructing and techniques for evaluating operations and services in a variety of systems, including but not limited to, virtualized infrastructures, cloud platforms, datacenters, cloud-storage options, cloud data management, non-traditional key-value stores on the cloud, HPC architectures, etc. ***Keynote Speaker: Prof. Babak Falsafi (EPFL, Switzerland) *** TOPICS Suggested topics include, but are not limited to: - Algorithmic aspects of elasticity - Search and retrieval algorithms for cloud infrastructures - Scale-up and -out for NoSQL and columnar databases - Resource provisioning and management - Monitoring and analysis of elasticity for virtualized environments - Analysis of containerized applications - Cloud deployment tools and their analysis - Query languages and novel programming models - Content delivery through cloud infrastructures - Load-sharing and caching for cloud systems - Data structures and algorithms for eventually-consistent stores - Scalable access structures and indexing for cloud data-stores - Algorithmic aspects for cloud applications - Machine learning, analytics and data science - Resource availability, reliability and fail-over - NoSQL and schema-less data modeling and integration - Consistency, replication and partitioning CAP - Transactional models and algorithms for cloud data-stores PROCEEDINGS Accepted papers will be included in the post-proceedings in the Lecture Notes in Computer Science by Springer-Verlag (http://www.springer.com/gp/computer-science/lncs <http://www.springer.com/gp/computer-science/lncs>). SUBMISSION GUIDELINES Submissions must have a length of up to 12 pages in LNCS format (excluding references and an optional appendix to be read at the discretion of the Program Committee). Papers should be submitted electronically via the Easy Chair Submission system (https://easychair.org/conferences/?conf=algocloud17 <https://easychair.org/conferences/?conf=algocloud17>). By submitting a paper the authors acknowledge that in case of acceptance at least one of the authors must register and attend ALGO 2017 or ALGOCLOUD 2017, and present the paper. IMPORTANT DATES - Paper submission: June 23, 2017 - Author notification: July 25, 2017 - Workshop: September 4-5, 2017 COMMITTEES Workshop Chairs  - Dan Alistarh (IST, Austria) - Alex Delis (University of Athens, Greece) Proceedings and Publicity Chair - George Pallis (University of Cyprus, Cyprus) PC Members  - Stergios Anastasiadis (University of Ioannina, Greece) - Athman Bouguettaya (University of Sydney, Australia) - Marco Canini (KAUST, Saudi Arabia) - Aleksandar Dragojevic (Microsoft Research, UK) - Schahram Dustdar (TUW, Austria) - Rachid Guerraoui (EPFL, Switzerland) - Gabriel Istrate (University of Timişoara & e-Austria RI, Romania) - Thomas Karagiannis (Microsoft Research, UK) - Nectarios Koziris (NTUA, Greece) - Fernando Pedone (University of Lugano, Switzerland) - Florin Pop (University Politehnica of Bucharest, Romania) - Raj Ranjan (Newcastle University, UK) - Luis Rodrigues (Universidade Técnica de Lisboa, Portugal) - Rizos Sakellariou (University of Manchester, UK) - Stefan Schmid (Aalborg University, Denmark) - Zahir Tari (RMIT, Australia) - Vasileios Trigonakis (Oracle Labs, Switzerland) - Dimitris Tsoumakos (Ionian University, Greece) Steering Committee - Spyros Sioutas (Ionian University, Greece) - Peter Triantafillou (University of Glasgow, UK) - Christos D. Zaroliagis (University of Patras, Greece)

1 1